Stop emitted object moving?

Skn3-- 25 avril 2020 15:53

How do we stop an already emitted object from moving? For example I want it to stop after a few seconds or if the emitted object detects a wireless signal.

• 

  CLOUD1985

  • 25 avril 2020 18:56

  You could stick a mover on it and set x, y & z speeds to 0.
  
  Place your timer beside the mover and wire the timer finished output into the x, y & z dampening of the mover.
  
  When the timer is done it'll activate dampening for the object in every direction & should stop it moving.

  0

  Signaler cette publication
• 

  Skn3--

  • 25 avril 2020 21:45

  Ah cool! I thought the mover just applied force to existing movement speed. So thought 0 would do nothing. I’ll give this suggestion a try tomorrow! Thanks.

  0

  Signaler cette publication
• 

  Skn3--

  • 25 avril 2020 22:57

  So unfortunately your method does not work. Forces are applied not set.

  0

  Signaler cette publication
• 

  CLOUD1985

  • 26 avril 2020 07:52

  This method will work, I use it myself.
  
  Make sure that movent speed on the movers x, y & z are all set to 0.
  
  Make sure dampening in x, y & z are all set to 100.
  
  Then make sure you use the timer finished output, (not the timer pulse output) & wire timer finished into the x, y & z dampening on the mover.
  
  When the timer is finished it gives a constant on output and switches on full dampening in every direction & will stop the object moving.

  0

  Signaler cette publication
• 

  Skn3--

  • 26 avril 2020 09:17

  I’ll try again. I think I had set dampening to zero!

  0

  Signaler cette publication
• 

  Skn3--

  • 26 avril 2020 09:20

  Brilliant! That works. Thanks!!!

  0

  Signaler cette publication
• 

  Skn3--

  • 26 avril 2020 09:37

  Comment spam! Also pulsing seems to work fine too :D

  0

  Signaler cette publication
• 

  Skn3--

  • 26 avril 2020 09:56

  Final comment bomb:
  For anyone searching for this in the future, here is a handy premade logic chip.
  https://indreams.me/element/oRxdxgEmHMj

  0

  Signaler cette publication
• 

  CLOUD1985

  • 26 avril 2020 15:12

  Great to hear. I was unsure if the timer pulse would work fast enough to stop the object completely.
  

  0

  Signaler cette publication

Vous devez vous connecter pour laisser un commentaire.